Continuous Fold Pad Pillow

Rather than having two pillow pads at the end of the fold hinge we extend the pillow pad the full width of your cover.

This reduces the very slight amount of heat lost vertically through the hinge.

Strengthening Sheets

Where your spa is fitted flush in ground you may want additional strength to the cover to further minimise the risk to young children or animals who may venture onto the cover. In this case we can add rigid pvc sheets to the top side of the insulation inserts for additional strength.

Speaker Hoods

For spa hot tubs with raised speakers there is the need for speaker hoods to be built into the cover.

Waterfall / Cascade Hoods

For spa hot tubs with raised water falls or cascades there is the need for a hoods to be built into the cover.

4 Section Spa Cover

Some times for spa hot tubs housed in gazebos or log cabins a two section folding cover is not practical due to height restrictions. In cases like this we can make the cover in four sections ie two sets of two folding covers

Additional Lifting Handles

Our covers come with two lifting handles to aid the lifting of your cover. Additional handles can be added if required.

Floating Bubble Cover

Floating covers are made from a bubble type material and as the name implies float on your spa's water.

By keeping hot tub water evaporation to a minimum, less moisture and chemicals will come in contact with your spa cover's underside, prolonging its longevity.

Final shape cutting with scissors is required by the customer which is quite easy.

Floating Thermal Blanket

Floating thermal covers are made using a foam material and as the name implies float on your spa's water.

By keeping hot tub water evaporation to a minimum, less moisture and chemicals will come in contact with your spa cover's underside, prolonging its longevity but most of all provide an additional layer of insulation keeping your heating costs down.

Final shape cutting with scissors is required by the customer which is quite easy.